|
Leveler |
Attribute |
Commands |
Index |
Value Range |
|
Bypass |
LVLRBYP |
SET, GET, SETD, GETD |
None |
0 = active 1 = bypassed |
|
Comp/Limiter |
Attribute |
Commands |
Index |
Value Range |
|
Bypass |
CLIMBYP |
SET, GET, SETD, GETD |
None |
0 = active 1 = bypassed |
|
Ducker |
Attribute |
Commands |
Index |
Value Range |
|
Input Level |
DKRLVLIN |
SET, GET, SETL, GETL, SETD, GETD |
None |
-100 ~ 12 * |
|
Level Sense |
DKRLVLSENSE |
SEET, GET, SETL, GETL, SETD, GETD |
None |
-100 ~ 12 * |
|
Bypass Ducker |
DKRBYP |
SET, GET, SETD, GETD |
None |
0 = active 1 = bypassed |
|
Sense Mute |
DKRMUTESENSE |
SET, GET, SETD, GETD |
None |
0 = unmuted 1 = muted |
|
Input Mute |
DKRMUTEIN |
SET, GET, SETD, GETD |
None |
0 = unmuted 1 = muted |
|
Logic In Enable |
DKRENLOGIN |
SET, GET, SETD, GETD |
None |
0 = disabled 1 = enabled |
|
Logic Out Enable |
DKRENLOGOUT |
SET, GET, SETD, GETD |
None |
0 = disabled 1 = enabled |
|
Logic Input Invert |
DKRINVLOGIN |
SET, GET, SETD, GETD |
None |
0 = normal 1 = inverted |
|
Logic Output Invert |
DKRINVLOGOUT |
SET, GET, SETD, GETD |
None |
0 = normal 1 = inverted |
* Can contain a decimal number.
|
Noise Gate |
Attribute |
Commands |
Index |
Value Range |
|
Bypass |
NGBYP |
SET, GET, SETD, GETD |
None |
0 = active 1 = bypassed |
Example: Set Device 3 Noise Gate Bypass at Instance 55 to active.
|
Command |
Dev # |
Attribute |
Inst ID |
Index 1 |
Index 2 |
Value |
Line Feed |
|
SET |
3 |
NGBYP |
55 |
None |
None |
0 |
<LF> |
Result: SET 3 NGBYP 55 0 <LF>