|
Delay |
Attribute |
Commands |
Index |
Value Range |
|
Delay in Milliseconds |
DLYMSEC |
SET, GET, SETL, GETL, SETD, GETD |
None |
0 ~ ? * |
|
Delay in Centimeters |
DLYCM |
SET, GET, SETL, GETL, SETD, GETD |
None |
0 ~ ? * |
|
Delay in Meters |
DLYM |
SET, GET, SETL, GETL, SETD, GETD |
None |
0 ~ ? * |
|
Delay in Inches |
DLYIN |
SET, GET, SETL, GETL, SETD, GETD |
None |
0 ~ ? * |
|
Delay in Feet |
DLYFT |
SET, GET, SETL, GETL, SETD, GETD |
None |
0 ~ ? * |
|
Delay Bypass |
DLYBYP |
SET, GET, SETD, GETD |
None |
0 = active 1 = bypassed |
* Can contain a decimal number.
Note: Value Range is from 0 to the maximum value for the specific delay block. For example, a 50mSec delay has a maximum setting of 1717 centimeters, 17 meters, 676 inches, or 56 feet.
Example: Set Device 1 Delay In Centimeters at Instance 24 to 40 centimeters.
|
Command |
Dev # |
Attribute |
Inst ID |
Index 1 |
Index 2 |
Value |
Line Feed |
|
SET |
1 |
DLYCM |
24 |
None |
None |
40 |
<LF> |
Result: SET 1 DLYCM 24 40 <LF>