Transfer Function may be connected between any two component outputs on the same signal path, for a comparative analysis of processing. Gain displays the difference in frequency response between the two comparison points, as a white line. Phase displays the phase relationship between the two comparison points, as a green line. Unwrap removes out-of-range phase rotations from the phase display. Delays adds the effect of user-placed delay blocks (Delay and Matrix Mixer w/ Delay) into the phase display. The Phase display does not indicate inherent propagation delay within the system. Propagation delay is indicated separately at the bottom of the dialog box (1/3mS hops, if not compiled...or...real-time including equalization delay, if compiled). When a Transfer Function dialog box is open, the associated signal path is indicated as a dashed red line in the layout.